Equipment Maintenance


Bryant - Air Conditioning & Heating Equipment Preventative Maintenance

With regular maintenance you will prevent small problems from becoming big problems and ensure optimal performance of your comfort system. Dirty coils reduce efficiency and causes your unit to work harder which causes parts to wear out faster and shorten the life expectency of your unit. Your unit will cost you more month after month on your utility bill if the coils are not kept clean. Tests performed by the EPA explain that as little as 1/10th of a centimeter of dirt or dust on a coil could reduce efficiency by 21%. Since the average homeowner's heating and cooling bill is $1,500 per year, a 21% loss in efficiency means you could be wasting up to $315 each year. We also offer annual maintenance agreements, which can reduce the cost of a Performance Tune-Up.

Regular maintenance of your equipment will:

  • Provide longer lasting equipment
  • Reduce utility bills
  • Reduce repairs
  • Provide a more comfortable indoor environment
  • Protect your investment

What we do during a Performance Tune-Up:


Performance Furnace Tune-Up

  • Test for carbon monoxide leaks
  • Clean burner assembly
  • Clean ignition assembly
  • Inspect filtration system
  • Adjust blower components
  • Lubricate moving parts as required
  • Test and adjust safety controls
  • Tighten electrical connections
  • Calibrate thermostat
  • Check flue draft
  • Check combustion
  • Inspect vent piping


Performance Air Conditioner Tune-Up

  • Clean condenser coil
  • Inspect evaporator coil if accessible
  • Clean condensate drain
  • Inspect filtration system
  • Adjust blower components
  • Lubricate moving parts as required
  • Inspect for refrigerant leaks
  • Test condensate pump
  • Tighten electrical connections
  • Test starting capabilities
  • Measure air temperature differential
  • Monitor refrigerant pressure
  • Measure amperage and voltage

Performance Fan Coil Tune-Up

  • Inspect evaporator coil
  • Inspect filtration system
  • Adjust blower components
  • Lubricate moving parts as required
  • Test and adjust safety controls
  • Tighten electrical connections
  • Calibrate thermostat
  • Inspect electrical heating elements

Performance Heat Pump Tune-Up

  • Clean condenser coil
  • Clean condensate drain
  • Check defrost controls
  • Inspect auxiliary heaters
  • Inspect filtration system
  • Lubricate moving parts as required
  • Inspect for refrigerant leaks
  • Test condensate pump
  • Tighten electrical connections
  • Test starting capabilities
  • Measure air temperature differential
  • Monitor refrigerant pressure
  • Measure amperage and voltage

Our Performance Tune-Up has a value of $95 per unit.  We also offer annual maintenance agreements starting at $80 per unit which provide additional savings on any necessary repairs.

Click here to view our annual maintenance agreement program.